|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TRUMPower DESCRIPTION The TFC130 series incorporates creative high efficiency circuitry, high power density (6.94 3 Watts/in ) and active Power Factor Correction (PFC) to meet the requirements of data networking, computing and telecommunication systems. PFC 130 WATT POWER SUPPLIES TFC130 SERIES (SINGLE OUTPUT) (LVD) RoHS FEATURES EN61000-3-2 class A and D compliant Power factor 0.98 typical Very compact size, 3x5x1.2 Overvoltage protections Short circuit protections Remote sense Compliant with RoHS requirements INPUT SPECIFICATIONS 90 to 264VAC 47 to 63Hz 2.1A rms max. for 115VAC 1.1A rms max. for 230VAC Earth leakage current: 0.3mA max. @ 115VAC, 60Hz (Touch current) 0.6mA max. @ 230VAC, 50Hz Input voltage Input frequency Input current Safety Standard Approvals UL 60950-1 CSA C22.2 No. 60950-1 TUV EN60950-1 OUTPUT SPECIFICATIONS Output voltage/current See Rating Chart Ripple and noise 2% peak to peak on 5.1V model 1% peak to peak on other models. Overvoltage protection Provided on output set at 112-132% of its nominal output voltage Overcurrent protection Protected to short circuit conditions Temperature coefficientAll outputs 0.04%/C maximum Transient response Maximum excursion of 4% or better on all models; recovering to 1% of final value within 500s after a 25% step load change GENERAL SPECIFICATIONS Switching frequency 110KHz 15KHz Power factor 0.98 typical Efficiency 72% typical on 5.1V output, 76% typical on other outputs Hold-up time 15 msec minimum at 115VAC Line regulation 0.5% maximum at full load Inrush current 35 amps @ 115VAC or 70 amps @ 230VAC at 25C cold start Withstand voltage 3000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF 200,000 hours minimum EMC Performance (EN55024) EN55022: FCC Part 15 VCCI: EN61000-3-2: EN61000-3-3: EN61000-4-2: EN61000-4-3: EN61000-4-4: EN61000-4-5: EN61000-4-6: EN61000-4-8: EN61000-4-11: Class B conducted, class A radiated Class B conducted, class A radiated Class B conducted, class A radiated Harmonic distortion, class A and D Line flicker ESD, 8KV air and 4KV contact Radiated immunity, 3V/m Fast transient/burst, 1KV Surge, 1KV diff, 2KV com. Conducted immunity, 3Vrms Magnetic field immunity, 1A/m Voltage dips, 30% reduction for 500ms and >95% reduction for 10ms ENVIRONMENTAL SPECIFICATIONS Operating temperature Storage temperature Relative humidity Derating Cooling -10C to +60C -40C to +85C 5% to 95% non-condensing Derate from 100% at +40C linearly to 50% at +60C 10 CFM total forced air from two 40mm diameter fans or the like is required and provided by user Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 Fax: 408-988-6622 email: sales@trumpower.com Website: www.TRUMPower.com UNIVERSAL INPUT OUTPUT VOLTAGE/CURRENT RATING CHART Output Product No. TFC130-S5.1 TFC130-S12 TFC130-S15 TFC130-S18 TFC130-S24 TFC130-S30 TFC130-S36 TFC130-S48 NOTES: 1. 2. 130 watts maximum at 10 CFM forced air cooling. Ripple and noise is measured peak to peak across a 20MHz bandwidth by using a 12 inch twisted pair terminated with a 10uF tantalum capacitor in parallel with a 0.1F ceramic capacitor. Suffix codes for over-temperature protection function and output connector are as follows. TFC130-X1 X2 X3, where "X1" is the product code from the above table, "X2" is the over-temperature protection function (Blank=without over-temperature protection, W=with over-temperature protection), "X3" is output connector (Blank=Molex KK type, T=miniature terminal blocks), e.g. TFC130-S24-W (24V output voltage, with over-temperature protection, Molex KK type). Vnom. 5.1V 12V 15V 18V 24V 30V 36V 48V Imin. 0.7A 0.5A 0.5A 0.5A 0.4A 0.4A 0.3A 0.3A Imax. 25.5A 10.8A 8.7A 7.2A 5.4A 4.3A 3.7A 2.7A Tol. 2% 2% 2% 2% 2% 2% 2% 2% TFC130 SERIES Maximum Output Power 130W 130W 130W 130W 130W 130W 130W 130W 3. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Connector P1 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Molex KK type connectors: Connector P3 mates with Molex housing 09-50-3101 and Molex 2878 series crimp terminal. 5. Miniature terminal blocks: Connector P3 are suitable for AWG#18~AWG#12 electric wires. 6. Connector P2, P4 mates with Molex housing 22- 01-1023 and Molex 40445 series crimp terminal. 7. Weight: 0.38 kgs (0.84 lbs.) approx. 8. Potentiometer (VR1) is for output voltage adjustment. PIN CHART CONN Product No. TFC130-S5.1 TFC130-S15 TFC130-S24 TFC130-S36 TFC130-S12 TFC130-S18 TFC130-S30 TFC130-S48 1 2 P1 3 1 P2 Void Void 2 1 2 3 3 4 4 P3 Void Void 5 6 P4 7 7 8 8 Void Void 9 10 1 2 AC AC Void +SENSE -SENSE LIVE NEUTRAL OUTPUT RETURN FAN RET. (12V) Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 Fax: 408-988-6622 email: sales@trumpower.com Website: www.TRUMPower.com |
Price & Availability of TFC130-S51 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |